The HCCF 1 is a simple to operate plug&play system for filling and seaming cans under counterpressure in an oxygen-free space covering high hygienic requirements. It can be connected directly to the product source (e.g. beer brewing tank). For operation, the HCCF 1 only needs electricity (200-240V), compressed air (6bar) and an inert gas source (e.g. CO₂ or N₂).

Non-carbonated beverages like cider, fruit juices, wine, non-sparkeling water and so on can also be filled into cans in this way. The desired internal can pressure of the protective gas (e.g. Nitrogen N₂) can be easily set using the operating software. With our solution you don’t need a liquid nitrogen drop dispenser and therefor no liquid nitrogen at all (at minus 196 degrees Celsius).

The product does not need to be cooled for filling into the cans (= energy saving).

Specs overview:

• Counterpressure filler and seamer
• CO₂/N₂ inert gas atmosphere
• Residual oxygen supply in can be set below 10 ppb
• CIP (Clean-In-Place)
• Manual can and lid feeding
• 360 – 720 cph (cans per hour)
• Cans: 150ml to 568ml (Standard, Sleek, Slim)
• Can format changeover with the same lid format possible within seconds during operation
• Can format changeover with lid format change possible within minutes during operation
• External machine dimensions: width: 670mm, depth: 960mm, height: 1960mm
• Machine weight: approx. 250kg (on rolls, can be moved by hand)
• Ex Works (EXW)
• Payback possible within 1 year

OPTION

• Automatic can and lid feeding